Avient Infinite FX Silver Shimmer
Infinite FX Silver Shimmer
Avient™ Specialty Ink INFINITE FX SHIMMERS are a special effect with a fine-medium size metallic flake for a brilliant shimmer effect with a smooth and soft feel.
These shimmers are ready-for-use or can be tinted using plastisol colorants for a custom look.
100% cotton, cotton blends, some synthetics
SILVER SHIMMER | 15370
Brilliant metallic shimmer effect with smooth surface
Ready-for-use or tintable
Excellent adhesion to fabrics, stretch properties, and wash durability
Low-cure, save energy
Stir inks before printing
Use consistent, high-tensioned screen mesh to optimize performance properties
Print in last position or flash after each print if using multiple screens
Print direct to fabric or over a flashed-dried base plate. Use a suitable underbase when printing on garments prone to bleed
Tintable with plastisol colorants. See Pigment Loading section for suggested tinting percentages. Adjust the % colorant added based on the strength of the colorants and color saturation desired
Metallics reflect infrared heat and a forced air dryer is recommended for curing. If using an electric oven, extend dwell time to achieve proper cure
Curing is a time and temperature process, a lower oven temperature setting with a slower belt speed while maintaining recommended ink cure temperature is always best to protect fabric, control dye migration and reduce energy consumption
15370 and 85570 INFINITE FX SHIMMERS can be cured between 270°F-320°F (132°C-160°C)
Can be mixed with other Infinite FX HD bases or clears
For cold-peel transfers, use a coated release paper or polyester film. Print using 70 duro squeegee and recommended mesh counts followed by adhesive. Gel at 212°F (100°C) for 60 sec. Apply transfer with heat press at 300°F (150°C) for 10-12 sec at medium pressure. For transfers on polyester, back with a low bleed white and/or blocker. Verify process.
Feel free to live chat with us if you have any questions.