CCI Quik Dry Water Soluble Blockout
CCI QUIK-DRY® Blockout
Is a low viscosity, water-soluble green blockout designed to fill the open areas of the screen not covered by the emulsion.
Use for masking several designs on a screen until ready to print or for multi-color work. QUIK-DRY® is also very good for touching up pinholes.
- Dries Fast
- Easy To Use
- Ideal For Water-Based, Discharge, & Plastisol Ink
- Pleasant Odor
- Coverage In One Coat
- Durable / High Abrasion Resistance
- Easily Removed With Water
- Biodegradable / Drain Safe
Use blockout to fill gaps between the emulsion edge and the frame on the print side. This eliminates the need and expense of tape on the print side. Give it a try today.
When the screen is dry and free of any contaminants, pour Quik-Dry® on the squeegee side of the screen. Using a plastic blade applicator, spread over the open areas of the screen until completely filled.
Touch up all the defects, including heavy blobs which tend to dry on the outside and pop off or smear during printing. Where very fine meshes are used it may be necessary to reduce the viscosity by adding a little water.
After ink removal, remove block-out with water.
Feel free to live chat with us if you have any questions.