Epson F3070 Flushing Pad Kit
Genuine Epson replacement flushing pad set designed for the SureColor F3070 DTG printer, helping maintain the print head cleaning system and reliable printer operation.
Characteristics
The Epson SureColor F3070 Replacement Flushing Pad Kit is a genuine Epson maintenance component designed specifically for the SureColor F3070 direct-to-garment printer. The flushing pads are part of the printer's print head maintenance system and collect ink discharged during cleaning and maintenance operations.
Over time, waste ink can accumulate and harden on the surface of the flushing pads. Epson recommends checking the condition of the pads and replacing them when necessary. If hardened waste ink prevents the pad's mesh from being clearly visible, Epson specifies replacing the flushing pads with new ones.
This replacement set allows operators to replace the flushing pads independently rather than replacing the complete Head Cleaning Set when the other maintenance components do not require replacement. Epson identifies the F3070 Flushing Pad Set as part number C13S210107 and specifically lists it for situations where only the flushing pads need to be changed.
Regular inspection and replacement of the flushing pads helps keep the printer's maintenance system functioning properly and prevents excessive hardened waste ink from accumulating around this critical print head maintenance area.
- Genuine Epson replacement maintenance component
- Designed specifically for the Epson SureColor F3070
- Epson part number C13S210107
- User-replaceable flushing pads
- Allows flushing pads to be replaced separately from the complete Head Cleaning Set
- Collects ink discharged during print head maintenance and cleaning
- Helps maintain proper operation of the print head maintenance system
- Direct replacement for the printer's existing flushing pads
- Designed for routine and as-needed printer maintenance
- Genuine Epson component for proper fit and compatibility
- Inspect the flushing pads as part of regular F3070 printer maintenance.
- Replace the pads if waste ink has hardened to the point that the mesh surface cannot be clearly seen.
- Follow the maintenance and replacement procedure displayed by the printer and outlined in the Epson SureColor F3070 User's Guide.
- When removing a used flushing pad, lift it carefully because accumulated ink may splash if the pad is raised too quickly.
- Allow excess waste ink to drain before completely removing the used pad.
- Install the replacement pad by inserting its hooks into the corresponding printer slots and pressing the tab down until the pad is securely seated.
- Confirm that the flushing pads are installed correctly before operating the printer; improperly seated hooks could damage the print head.
- Use genuine Epson maintenance components to ensure proper fit and compatibility with the F3070.
